Idn; Opc - ITech IT-M7700 Series Programming Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Arguments
Returns
Related Command

*IDN?

Query Syntax
Arguments
Returns
Example

*OPC

Syntax
Arguments
None
<NR1>
The value returned is the binary-weighted sum of all bits set in the register.
*CLS *ESE *ESE? *OPC
Identification Query. Returns instrument's identification string, which contains
four comma-separated fields. The first field is the manufacturer's name, the
second field is the instrument model number, the third field is the serial number,
and the fourth field is the firmware revision.
*IDN?
None
Manufacture, model, serial number, UI ver-DSP1 ver-DSP2 ver-PFC
ver-Interface ver
ITECH, M7722, 00000000000004, 1.01-1.00-1.0-1.1-1.2
Sets the OPC (operation complete) bit in the standard event register. This
occurs at the completion of the pending operation.
*OPC
None
Copyright© Itech Electronic Co., Ltd.
www.tehencom.com
IEEE-488 Common Commands
22