[Source:]Normal:surgetrap:mode; [Source:]Normal:surgetrap:period - ITech IT-M7700 Series Programming Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Query Syntax：
Returns：

[SOURce:]NORMal:SURGETRAP:MODe

Syntax
Arguments：
Query Syntax：
Returns：

[SOURce:]NORMal:SURGETRAP:PERIOD

Syntax
Arguments
Query Syntax：
Returns：
[SOURce:]NORMal:DIMMer:MODe?
<0|1|2|3|OFF|DIMMER|LEADING|TRAILING>
This command enables or disables the Surge/Trap Function.
[SOURce:]NORMal:SURGETRAP:MODe <0|1|OFF|ON>
<0|1|OFF|ON>
[SOURce:]NORMal:SURGETRAP:MODe?
<0|1|OFF|ON>
The command is used to set the period of the surge/trap.
[SOURce:]NORMal:SURGETRAP:PERIOD <NR1>
<NR1> 1 ~ 999 (cycle)
[SOURce:]NORMal:SURGETRAP:PERIOD?
<NR1>
Copyright© Itech Electronic Co., Ltd.
www.tehencom.com
SOURce Subsystem
51