Installing The Accessories; Removing The Adjustable Headrest - Evenflo Triumph Owner's Manual

Installing the Accessories

The Body Pillow and
Infant Head Support
WARNING
Use the Body Pillow and Infant Head Support with the child
restraint in the rear-facing position ONLY.
D

Removing the Adjustable Headrest

1
Not available on all models.
A
50
The optional Body Pillow
is used to help support your
child by placing it in the
restraint, as shown.
C
For about the first three
months, a baby's head needs
extra support.
The optional Infant Head
Support should lie flat
D
against the seat back, as
shown. Be sure to cut off the
plastic attachment between
the head support and the
seat pad. Small parts may be
a choking hazard.
DO NOT use if the top of the
child's ears are above the top
of the headrest at its highest
position.
Remove the headrest for this
child to use the restraint,
as long as the child meets
all other height and weight
requirements.
Unbuckle harness straps,
disconnect chest clip, and
raise BeltTrac access flap
2
A
C
3
A
4
.
A
Fold in both sides of the
BeltTrac access flap
B
Remove the headrest
from the folded BeltTrac
access flap .
A
Lower BeltTrac access
flap and attach Velcro®.
A
A
.
A
B
51