Installing The Head Restraints; Rear Outboard Seats; Adjusting The Height Of The Head Restraints - Toyota Avalon Owner's Manual

■

Installing the head restraints

Front seats

Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.

Rear outboard seats


Align the head restraint with the installa-
tion holes and push it down to the lowest
lock position while pressing the lock
release button.
■

Adjusting the height of the head restraints

Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
WARNING
■
Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
Use the head restraints designed for each respective seat.
●
Adjust the head restraints to the correct position at all times.
●
After adjusting the head restraints, push down on them and make sure
●
they are locked in position.
Do not drive with the head restraints removed.
●
(However, if a head restraint interferes with installation of a child restraint
system, the head restraint can be removed to accommodate the child
restraint system: P. 50)
AVALON_GE
AVALON_OM_General_OM41476E
3-3. Adjusting the seats
Lock release
button
Lock release
button
137
3