Changing Settings Of The Pre-Collision System; Enabling/Disabling The Pre-Collision System; Changing The Pre-Collision Warning Timing - Toyota Avalon Owner's Manual

208
4-5. Using the driving support systems

Changing settings of the pre-collision system

■

Enabling/disabling the pre-collision system

The pre-collision system can be enabled/disabled on
of the multi-information display.
The system is automatically enabled each time the engine switch is
turned to IGNITION ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
■

Changing the pre-collision warning timing

The pre-collision warning timing can be changed on
the multi-information display.
The operation timing setting is retained when the engine switch is
turned off.
Far
1
The warning will begin to oper-
ate earlier than with the default
timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to oper-
ate later than with the default
timing.
AVALON_GE
AVALON_OM_General_OM41476E
(P. 85)
(P. 85) of