Table of Contents
Advertisement
■
Installing the head restraints
Front seats
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Rear seats (except center seat)
Align the head restraint with the installa-
tion holes and push it down to the lowest
lock position while pressing the lock
release button.
■
Adjusting the height of the head restraints (except rear center seat)
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
■
Adjusting the rear seat head restraint (except center seat)
Always raise the head restraint one level from the stowed position when
using.
WARNING
■
Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
●
Use the head restraints designed for each respective seat.
●
Adjust the head restraints to the correct position at all times.
●
After adjusting the head restraints, push down on them and make sure
they are locked in position.
●
Do not drive with the head restraints removed.
AVALON (U)_(01999-07001)
3-3. Adjusting the seats
Lock release button
Lock release button
127
3
Advertisement
Table of Contents
