Installing The Rear Head Restraints (Double Cab Models Only); When Installed The Rear Outboard Head Restraints To Opposite Direction; Adjusting The Height Of The Head Restraints; Adjusting The Front Center Seat And Rear Center Seat Head Restraints - Toyota Tacoma 2013 Owner's Manual

Installing the rear head restraints (Double Cab models only)

■

When installed the rear outboard head restraints to opposite direction

■
(Double Cab models only)
While pressing in the screwdriver, pull up the head restraint.

Adjusting the height of the head restraints

■
Adjusting the front center seat (Bench type seat) and rear center seat
■
head restraints (Double Cab models)
Always raise the head restraint one level from the stowed position when
using.
1-3. Adjustable components (seats, mirrors, steering wheel)
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Push a flathead screwdriver into the slot.
The slot is located on the left side of the
right head restraint anchor.
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
1
59