Table of Contents
Advertisement
Available languages
Available languages
AE 10/1, AE 15/1
core drill hole 115 mm or 170 mm.
Use
lar wall breakthroughs for AE 10/1.
5. Lay the power cable up to the installation
location, for spacing
Allow for approx. 110 mm of power cable
length in the housing.
8 Installation
8.1 Installation of AE 10/1
1. Unpack the AE 10/1.
2. Remove the cover unit (design cover [6]
with housing cover [5]). Unlock the safety
catch (lower arrow) with a screwdriver.
3. Insert housing [2] into wall break-
through/wall sleeve (TOP must be at
top).
DE
ZM 11
mounting plate for rectangu-
previous figure.
UK
VENTILATOREN
FR
Advertisement
Table of Contents
