Maico AE 10/1 Installation And Operating Instructions Manual page 41

AE 10/1, AE 15/1
4. Align housing horizontally, mark both
dowel holes (arrows).
5. Remove housing, drill holes and insert
dowels.
6. Affix the supplied sealing strip all the way
around the housing connections so that
AE 10/1 does not draw in air erroneously.
7. Push cable grommet carefully out of
housing and remove it.
● NOTICE: Danger of short-circuits and
damage to the unit. Water will penetrate
if the power cable is incorrectly fed into
the unit housing or if the cable grommet
is not fitted correctly.
Cut off cable grommet cap such that the

cable grommet fits tightly round the power
DE
UK
VENTILATOREN
FR