Changing Temperature Scale; Adjusting Alarm Volume - Prince Castle EHB Series Operation Manual

The SET F/C menu is used to change the temperature scale.
1
Press and hold the PRINCE CASTLE LOGO button,
then immediately press and hold the ENTER button until the display shows one of six programming menus.
Use the UP or DOWN Arrow button to scroll to the SET F/C XXXX ↑ ↓ ENTR
Press the ENTER button to enter the menu.
2
Bar will display SET DEGR F/C ↑ ↓ ENTR and either the F or C will be blinking.
Use the UP and DOWN arrows to select the desired temperature mode (the selected mode will blink)
Press the ENTER button to confirm the selection. Press the PRINCE CASTLE LOGO button to save the setting.
The SET VOLUME menu is used to change the alarm volume.
1 1
Press and hold the PRINCE CASTLE LOGO button,
then immediately press and hold the ENTER button until the display shows one of six programming menus.
Use the UP or DOWN Arrow button to scroll to the SET VOL ↑ ↓ ENTR (Set Volume) menu.
NOTE: Only applicable in stand-alone mode when not connected to Product Management system.
A timer alarm is included to sound after a hold timer is complete. The volume is adjustable from level 0 to 3.
Once the menu is on the bar, press ENTER . Scroll to the desired volume setting and press ENTER to accept.
540-539-EN

Changing Temperature Scale

Adjusting Alarm Volume

11
Dedicated Holding Bin
(Edit Product Name) menu.
Printed in USA 12/16 © 2016
EHB Series