Bosch Indego XS 300 Original Instructions Manual page 27

Main Menu Sub-menu 1
Date & Time
Set Language
Info
Advanced
Tools
Troubleshooting
Online Support
http://www.bosch-diy.com/indego-help
Bosch Power Tools
Sub-menu 2 Explanation
Change the date and time.
Change the display language.
System status Information on battery charge, system information and operating
and charging time for the mower.
Wire ID Change the perimeter wire ID when possible interferences are
nearby.
Sensor setting/ Select between Low (uneven ground), Normal and High (slippery
Lawn condition ground). Mower bump sensor will become more or less sensitive
depending on lawn condition selected.
Remap Deletes the current map of the lawn area.
Factory reset Reset the mower to factory settings will delete all personal set-
tings (not PIN).
After a factory reset, the mower will need to remap the lawn area.
Garden overview Displays the number of mapped lawn areas, their size, their wire
ID and the date of the last time the lawn area was cut.
Delete garden Delete one specific lawn area map or select to delete all maps at
once.
Level check Information about the ground angle of the mower. If the mower is
in the docking station and the dot on the display is not within the
indicated circle, the docking station must be mounted at a new,
more level location.
Wire signal Detects the wire signal received from the perimeter wire, indicat-
ing its strength (for Service Agent).
The mower will not receive a wire signal while in the docking sta-
tion.
English | 27
F 016 L94 037 | (11.11.2020)