Bosch ROTAK 320 Instruction Manual
Hide thumbs
Also See for ROTAK 320:
- Operating instructions manual (170 pages) ,
- Operating instructions manual (170 pages)
Subscribe to Our Youtube Channel
Related Manuals for Bosch ROTAK 320
Summary of Contents for Bosch ROTAK 320
-
Page 1: Product View
xx.xx kg 3000 1/min IPX4 xxxxxxxxxxxx TYP F016 xxx xxx 230V ~ 50/60Hz XXXXW 20xx STOP F016 L70 483 • 06.10... -
Page 2: Specifications
Product Specification Operating Controls 1 Switch lever Lawnmower ROTAK 320 2 Safety button Part number 3 600 H85 .. Rated power 1000 3 Handle top Blade width [cm] 4 Mains plug** Height of cut [mm] 20 – 60 5 Cable restraint**... -
Page 3: Assembly
If the power cord is damaged, it must be replaced by Adjusting the Cutting Height a Bosch Service Centre. Products sold in GB only: Your machine is fitted with Stop, release switch lever and wait until an approved 13 A (BS 1363/A) electric plug and is the motor stops before adjusting height. - Page 4 non GB models 4 14 F016 L70 483 • 06.10...
-
Page 5: Mowing
F016 L70 483 • 06.10... -
Page 6: After Mowing/Storage
If the machine should happen to fail despite the care taken in manufacture and testing, repair should be carried out by an authorised customer service agent for Bosch garden products. For all correspondence and spare parts orders, al- ways include the 10-digit part number (TYP) from the nameplate of the machine! F016 L70 483 •... -
Page 7: Fault Finding
Fault Finding The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact your service agent. Warning: Switch off and remove plug from mains before investigating fault. Symptom Possible Cause Remedy... -
Page 8: Declaration Of Conformity
Engineering Certification Petaling Jaya 46200 Malaysia +60 3 79 58 30 00 ............. Fax (EW Dept.) +60 3 79 58 38 38 ........Robert Bosch GmbH, Power Tools Division www.bosch.com.sg Subject to change without notice F016 L70 483 • 06.10... -
Page 9: Safety Notes
Check the grassbox/bag frequently for wear or Replace worn or damaged blades and bolts in deterioration. sets to preserve balance. Replace worn or damaged parts for safety. Ensure replacement parts fitted are Bosch ap- proved. - Page 10 Operating instructions ROTAK 320 English...
Need help?
Do you have a question about the ROTAK 320 and is the answer not in the manual?
Questions and answers
Can you replace electrical cord
Yes, the electrical cord on Bosch part number 320 can be replaced, but only by a Bosch Service Centre if it is damaged.
This answer is automatically generated
How to adjust blade height in Rotak 320
To adjust the blade height on the Bosch Rotak 320:
1. Remove the grassbox to make adjustment easier.
2. Lift the mower.
3. Use the front wheel height indicator to see the current setting.
4. Pull or push each wheel to the desired height setting:
- I = 20 mm
- II = 40 mm
- III = 60 mm
5. Adjust the front wheel first, then repeat for the other wheels.
Make sure the mower is off and the blades have stopped before adjusting.
This answer is automatically generated