Program Auto - Sony ILCE-6500 Manual

image. In this case, the shutter sound is heard multiple times, but only one image is recorded.
For [Intelligent Auto] and [Superior Auto] mode, most of the functions are set automatically, and you
cannot adjust the settings on your own.
[82] Shooting Selecting a shooting mode

Program Auto

Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the
aperture value).
You can set shooting functions such as [ISO].
Set the mode dial to P (Program Auto).
1
Set the shooting functions to your desired settings.
2
Adjust the focus and shoot the subject.
3
Program Shift
When you are not using a flash, you can change the shutter speed and aperture (F-value)
combination without changing the appropriate exposure set by the camera.
Turn the control dial to select the aperture value and shutter speed combination with the shutter
button pressed halfway down, to adjust exposure.
"P" on the screen changes to "P*" when you turn the control dial.
To cancel program shift, set the shooting mode to other than [Program Auto], or turn off the
camera.
Note
According to the brightness of the environment, the program shift may not be used.
Set the shooting mode to another one than "P" or turn off the power to cancel the setting you made.
When the brightness changes, the aperture (F-value) and shutter speed also change while
maintaining the shift amount.