Table of Contents
Advertisement
Help Guide
Digital Still Camera
DSC-WX800
Program Auto
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value).
You can set shooting functions such as [ISO].
Set the mode dial to P (Program Auto).
1
Set the shooting functions to your desired settings.
2
Adjust the focus and shoot the subject.
3
Program Shift
When you are not using a flash, you can change the shutter speed and aperture (F-value) combination without changing
the appropriate exposure set by the camera.
Turn the control wheel to select the aperture value and shutter speed combination.
"P" on the screen changes to "P*" when you turn the control wheel.
To cancel program shift, set the shooting mode to other than [Program Auto], or turn off the camera.
Note
According to the brightness of the environment, the program shift may not be used.
Set the shooting mode to another one than "P" or turn off the power to cancel the setting you made.
When the brightness changes, the aperture (F-value) and shutter speed also change while maintaining the shift amount.
Related Topic
Switching the auto mode (Auto Mode)
4-745-585-11(1) Copyright 2018 Sony Corporation
89
Advertisement
Table of Contents
