On Battery Life; Notes On Charging The Battery Pack; Inserting/Removing A Memory Card - Sony ILCE-6500 Manual

On battery life

The battery life is limited. If you use the same battery repeatedly, or use the same battery for
a long period, the battery capacity decreases gradually. If the available time of the battery is
shortened significantly, it is probably time to replace the battery pack with a new one.
The battery life varies according to how the battery pack is stored and the operating
conditions and environment in which each battery pack is used.
[18] Preparing the camera

Notes on charging the battery pack

The supplied AC Adaptor is dedicated to this product. Do not connect with other electronic
devices. Doing so may cause a malfunction.
Make sure to use a genuine Sony AC Adaptor.
If the product's charge lamp flashes while charging, remove the battery pack being charged,
and then insert the same battery pack firmly back into the product. If the charge lamp
flashes again, this may indicate a faulty battery or that a battery pack other than the
specified type has been inserted. Check that the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with a new or
different one and check that the newly inserted battery is charging correctly. If the newly
inserted battery is charging correctly, the previously inserted battery may be faulty.
If the charge lamp flashes even if the AC Adaptor is connected to the product and the wall
outlet (wall socket), this indicates that charging has stopped temporarily and is on standby.
Charging stops and enters standby status automatically when the temperature is outside of
the recommended operating temperature. When the temperature returns to the appropriate
range, charging resumes and the charge lamp lights up again. We recommend charging the
battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F).
[19] Preparing the camera

Inserting/removing a memory card

Explains how to insert a memory card (sold separately) to the product.
Open the battery/memory card cover.
1
Charging the battery pack
Inserting a memory card (sold separately)