Connecting The Camera To A Computer - Sony ILCE-6500 Manual

Note
Log on as Administrator.
It may be necessary to restart your computer. When the restart confirmation message appears,
restart the computer following the instructions on the screen.
DirectX may be installed depending on your computer's system environment.
[263] Using a computer

Connecting the camera to a computer

Insert a fully charged battery pack into the camera, or connect the camera to a wall
1
outlet (wall socket) using an AC Adaptor (sold separately).
Turn on the camera and the computer.
2
Check that [USB Connection] under
3
Connect the camera to the computer using the micro USB cable (supplied) (A).
4
When you connect the camera to the computer for the first time, the procedure for
recognizing the camera may start automatically on the computer. Wait until the
procedure is finished.
If you connect the product to your computer using the micro USB cable when [USB
Power Supply] is set to [On], power is supplied from your computer. (Default setting:
[On])
Importing images for use on a computer
(Setup) is set to [Mass Storage].