Exp.comp.set - Sony ILCE-6500 Manual

The set standard value will be applied when you select the corresponding metering mode in
MENU → (Camera Settings1) → [Metering Mode].
Multi/ Center/
Note
The exposure compensation will not be affected when [Exposure Std. Adjust] is changed.
The exposure value will be locked according to the value set for [
The standard value for M.M (Metered Manual) will be changed according to the value set in
[Exposure Std. Adjust].
The value set in [Exposure Std. Adjust] is recorded in Exif data separately from the exposure
compensation value. The amount of exposure standard value will not be added to the exposure
compensation value.
If you set [Exposure Std. Adjust] during bracketing shooting, the number of shots for the bracketing
will be reset.
[100] Shooting Adjusting the exposure modes/metering modes

Exp.comp.set

Sets whether to apply the exposure compensation value to control both flash light and ambient
light, or just ambient light.
MENU →
1
Menu item details
Ambient&flash:
Applies the exposure compensation value to control both flash light and ambient light.
Ambient only:
Applies the exposure compensation value to control ambient light only.
[101] Shooting Adjusting the exposure modes/metering modes
Zebra
The zebra pattern will appear over part of an image if the brightness level of that part meets the
Spot/ Entire Screen Avg./
(Camera Settings1) → [Exp.comp.set] → desired setting.
Highlight
Spot] during using spot AEL.