Table of Contents
Advertisement
5.2 Tightening torques
Recommended tightening torque for all nuts and bolts is listed in the table below. As applicable, torque seal has
been utilized to indicate bolt torqueing.
Table 5-1: Recommended tightening torque
Thread
All internal bolts are SAE Grade 5.
Note bolt head markings above to distinguish between grades.
All internal machine screws are Grade 2.
Size
Inch
1/4
5/16
3/8
1/2
SAE Grade 5
120,000 psi
Medium Carbon Heat T.
Lb-ft
6
11
20
48
®
TruFit
Power Distribution Unit│94-1100-00002873 A0 EN 33/34
Installation Guide
N-M
8
15
27
65
Advertisement
Table of Contents
