A
B
C
D
E
F
Specification overview
Item
Industrial network
Specification revision
Data rate
Connection size
Vendor ID
Device ID
Configuration program
An external PROFINET configuration tool such as Step 7 from Siemens, together
with RobotStudio, is needed for the configuration of DSQC 688. The external
PROFINET configuration tool should be used according to the manual for the
program.
Application manual - PROFINET Anybus Device
3HAC050968-001 Revision: C
Modular PROFINET device
Modules for the modular station
Ethernet switch
PROFINET anybus device, DSQC 688
IRC5 controller
PLC
© Copyright 2008-2016 ABB. All rights reserved.
1.2 The PROFINET anybus device for IRC5
Specification
PROFINET
PROFINET version 2.0
100 Mbit
Maximum 128 input bytes and 128 output bytes.
0x10C
0x07
1 Introduction
Continued
17