ABB DSQC1000 Applications Manual page 27

6
Viewing the MAC address
After the configuration, it is possible to view the MAC address of the PROFINET
anybus device on FlexPendant in one of the following ways:
Using the Industrial Network view.
1
2
3
4
Using the I/O Devices view.
1
2
3
4
Application manual - PROFINET Anybus Device
3HAC050968-001 Revision: C
Action
Restart the controller.
Now the IRC5 controller is ready to be
contacted from a PROFINET controller.
Action
In the ABB menu, tap Inputs and Out-
puts.
Tap View and select Industrial Network.
Tap PROFINET_Anybus.
Tap I/O Device Identification.
Action
In the ABB menu, tap Inputs and Out-
puts.
Tap View and select I/O Devices.
Tap the I/O device created to PROFINET
anybus device.
Tap Actions and select I/O Device Identi-
fication.
© Copyright 2008-2016 ABB. All rights reserved.
4 Configuring the anybus device
4.2 Configuring the anybus device
Note
Note
The list of most common I/O signals is
displayed.
The list of available industrial networks is
displayed.
The MAC address of PROFINET anybus
device is displayed along with the other
details.
Note
The list of most common I/O signals is
displayed.
The list of available I/O devices is dis-
played.
The MAC address of PROFINET anybus
device is displayed along with the other
details.
Continued
27