To Trigger A Measurement - Agilent Technologies 4338B Operation Manual

To Trigger a Measurement

To Trigger a Measurement
Follow the procedure below to perform successive measurements automatically (initial
setup).
Two methods to perform a measurement at your desired time:
Triggering the instrument at your desired time
:TRIG:SOUR
Command
*TRG
:TRIG
Starting up the trigger system at your desired time
:INIT:CONT
:ABOR
4-10 Remote Operation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:TRIG:SOUR
Query response
:TRIG:SOUR
:INIT
:INIT:CONT
:INIT:CONT
Applicable trigger mode
4338B