System - Devolo Magic 2 LAN1-1 Manual

Then, restart the devolo Magic adapter to ensure
that your changes take effect.

4.2.4System

In the System area, you can configure the settings
for security and other devolo Magic adapter device
functions.
System Information
System information lets you enter an user-defi-
ned name in the Device name (hostname) field.
This information is particularly helpful if multiple
devolo Magic adapters are to be used and identi-
fied in the network.
Password.
You can set a login password for accessing the web
interface.
By default, the built-in web interface of the
1-1
devolo Magic 2 LAN is not protected by a
password. We recommend assigning a password
when the installation of the devolo Magic 2 LAN
1
is complete to protect it against tampering by
third parties.
To do so, enter the desired new password twice.
Now the web interface is protected against un-
authorised access with your custom password!
Identify Device
The devolo Magic adapter can be located using the
Identify device function. Click Identify to make
the white PLC LED for the corresponding adapter
flash for 2 minutes to make it easier to identify by
sight.
LED
Enable the LED disabled option if the LEDs on the
devolo Magic adapter are intended to be switched
off for normal operation. An error status is indica-
Configuration 30
1-
1-1
devolo Magic 2 LAN