BRP Icon II 3.5” User Manual page 40

TROUBLESHOOTING
Troubleshooting Tip
Trim Position
Troubleshooting Tip
Trim Position
Troubleshooting Tip
Water Pressure
Troubleshooting Tip
Fuel and Oil Level
Troubleshooting Tip
38
Problem
Display does not power On.
Problem
Trim position is not accurate.
Problem
Trim position is not accurate.
Problem
Water pressure does not dis-
play or is not accurate.
Problem
Fuel and oil level does not dis-
play or is not accurate.
Solution
Charge the network power
supply battery to a mini-
mum of 12.5V.
Disconnect wiring harness
from back of gauge, and
then securely reconnect it.
Check for power at pins 1
and 2 of connector
Solution
Verify the trim calibration
settings.
Solution
Verify the trim calibration
settings.
Solution
Verify the water pressure
transducer selection; use
Evinrude Diagnostic soft-
ware (see your dealer).
Solution
Reset the configuration of
the fluid input source.
Reset the multi-point level
calibration for each fluid
tank.