PRODUCT INFORMATION
The Icon II 3.5" Color gauge is designed for use with Evinrude E-TEC
display communicates with the outboard, remote control(s), and other network connected
devices, by means of a NMEA 2000
The gauge handles standard NMEA 2000 messages and proprietary messages. The display
controls a number of helm functions and options. Some options and/or modes of operation are
not possible to access without this display present in the system. Select outboard sensor cal-
ibrations and functions are also accessible through the display.
Supports single and twin outboard applications. Twin engine applications require 2 gauges
(one for each outboard)
Viewable with polarized sunglasses
Bright illumination - 750 Nit (750 cd/m
Firmware update capability via USB interface
Integrates with Evinrude ICON II remote controls and Evinrude E-TEC G2 outboards
NMEA 2000 network interface
Pre-configured user selectable screens
Descriptive text for fault codes and procedures
Multi-language support
SYSTEM FUNCTIONS
The display provides a number of user selectable modes and configuration menus. Select
modes affect unit selection and screen appearance. Other modes interact with and affect
remote control and outboard operation and functionality.
This display interacts with system components including one Evinrude E-TEC G2 outboard,
up to two remote controls, and devices on a NMEA 2000 network.
4
®
compliant network.
FEATURES
2
)
®
G2 outboards. The