Calibration - BRP Icon II 3.5” User Manual

Calibration

Press the up and down arrow buttons to highlight Calibration.
Press the right facing arrow button to enter the Calibration screen.
Use the Calibrations screen to set calibration options for Fluid Tanks, Trim and Tilt.
362089-27
Fluid Tanks
Press the up and down arrow buttons to select the Fluid Tanks option.
Press the right facing arrow button to set calibration levels (2, 3, or 5 point) and tank volumes.
The fluid tank input source(s) are sourced from the control head (if applicable) or via the
NMEA 2000 network.
362089-16
15