Mode Selection; Throttle Source - BRP Icon II 3.5” User Manual

MODE SELECTION

Press the Mode Select button to access the Mode Select screen. The following table
describes the Mode Select functions:
Function
Throttle Select
Trim Assist (i-Trim)
Winterization
Power Steering Assist

Throttle Source

The "Hand" throttle selection is shown. Press the right facing arrow button to toggle the selec-
tion between "Hand" and "Foot".
Throttle source is only available on the gauge set to Port/Single
Settings/Options
Hand, Foot
On, Off
Initiate
Minimum, Medium, Maxi-
mum
Note
The "Foot" option will only
appear on the Mode Select
screen if a foot throttle is
installed in the system
Factory set to Off
Use for long term storage
Factory set to "Minimum"
Only available on Evinrude
E-TEC G2 outboards with
Dynamic Power Steering
(DPS) or iDock models
362089-26
23