Important Safety Instructions - pro user TPMS2 Safety And Operating Instructions Manual

INTRODUCTION
The Pro-User Tyre Pressure Monitoring Systems TPMS2 and TPMS4 are members of the
family of advanced car accessories manufactured by Pro-User International Ltd. The Pro-
User TPMS enables you to measure wirelessly your car´s tyre pressure in a convenient
way and offers additional security. By maintaining the ideal tyre pressure you can save
fuel and avoid excessive tyre wear. The unit will alert the driver if the tyre pressure or
the temperature exceeds the set values.
We have taken numerous measures in quality control to ensure that your product arrives
in top condition and will perform to your satisfaction.
Please carefully read and follow the safety and operating instructions. Not
following these instructions may result in a serious accident, including damaged
property or serious injuries or even loss of life.

IMPORTANT SAFETY INSTRUCTIONS

If you are not confident working with your car´s 12V DC voltage or are unsure of what
you are doing, read your car´s user manual or consider to seek for help by a car garage
or your vehicle´s manufacturer.
This System is intended to be used only on vehicles with a 12 Volt
DC automotive battery. NEVER CONNECT to 6V, 24V or other
batteries. Not following these instructions could cause serious
personal injury or material damage.
Use in dry environment only. Keep the main unit dry and clean. Do not use the
unit close to open fire. Do not operate the unit in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust. Please stop using the
device, if the unit is getting hot, is smoking or is showing any abnormal
behaviour. Pro-User is not liable for any direct or indirect damages or injuries
caused by the use of the device, especially caused by failure to follow these
instructions. The usage of this device does not absolve the vehicle driver from
his duty of care which involves checking the tyre pressure on a regular basis.
MAINTENANCE
Do not open the body casing of the main unit. There are no user-serviceable parts inside.
Damage due to improper use, modifications or attempted repairs lead to the exclusion of
liability and the loss of warranty.
PARTS
• TPMS main unit
• 2 Pressure-Sensors for Schrader valves and 2 hex nuts
(max. 9.9 bar, TPMS2 only)
• 4 Pressure-Sensors for Schrader valves and 4 hex nuts
(max. 3.5 bar, TPMS4 only)
• 1 nut wrench
• 1 opening tool
• gloves
2