Installing A Compact Flash Memory Module; Figure 4-2. Compact Flash Placement On The Cpv5350 Single - Motorola CompactPCI CPV5350 Installation And Reference Manual

Installing a Compact FLASH Memory Module

To mount the Compact FLASH memory module on the CPV5350 Single
Board Computer (SBC) refer to these steps and
1. Attach an ESD strap to your wrist and to chassis ground throughout
2. Shutdown the operating system.
3. Turn off power and remove the power lines from the system.
4. Remove the chassis or system cover(s) as necessary to access the
Figure 4-2. Compact FLASH Placement on the CPV5350 Single Board
http://www.motorola.com/computer/literature
this procedure.
compact PCI module.
Computer
Installing a Compact FLASH Memory Module
Figure 4-2:
2706 0003
4-3
4