Mounting The Device Holder; Mounting The Non-Slip Smartphone Holder To The Dashboard; Inserting The Smartphone; Connecting The Smartphone - EUFAB 16476 Operating Instructions Manual

5.1.1 Mounting the device holder

On the non-slip mat (position 1 in the overview), select the
position and the distance for the device holder, in accordance
with your smartphone type. Push the nubs of the device holder
(position 4 in the overview) into the holes of the non-slip mat
(Figure 2).
You can use the non-slip smartphone holder in either portrait or
landscape format (Figure 4a and Figure 4b).

5.1.2 Mounting the non-slip smartphone holder to the dashboard

Remove the protective foil from the rear of the non-slip smartpho-
ne holder. Clean the place on the dashboard where you wish to
mount the non-slip smartphone holder to make sure it is free from
dust and other dirt. Place the non-slip smartphone holder on the
dashboard and gently press into place with your hand.
With some dashboards, when used for long periods
of time and especially in summer temperatures, the
non-slip oating may react with the surface of the das-
hboard and leave a slight discolouration behind. For
this reason, always remove the non-slip smartphone
holder from the dashboard when you do not need it.

5.1.3 Inserting the smartphone

Insert your smartphone into the cut-outs of the device holder (Figure 4a and Figure 4b).
Figure 4a: Portrait

5.1.4 Connecting the smartphone

Connect your smartphone using the appropria-
te connector of the adapter cable (position 5 in
the overview). Place the magnetic coupling of the
adapter cable onto the magnetic contact (position 2 in
the overview), (Figure 4). Now connect the connector
of the USB connection cable (position 3 in the over-
view) with a USB socket in your vehicle or with a USB
adapter (not included in the scope of delivery) for the
12V vehicle socket.
Figure 2: Mounting the device holders
Figure 3: Holder on the dashboard
Figure 4b: Landscape
Figure 4: Connecting the smartphone
7