Operating Instructions; Mounting The Label; Mounting The Frame Holder - EUFAB PREMIUM TG Operating Instructions Manual

BEWARE!
Property damage due to opening the boot lid.
The boot lid could hit the bicycle carrier and be damaged.
• Switch off the electric boot lid release, and operate it manually.
• Fold up the bicycle carrier before opening the boot lid.
BEWARE!
Property damage caused by hot exhaust gases.
Damages may be caused to the carrier or bicycles if the exhaust outlet is close by.
• Use an exhaust defl ector if necessary
The general operating permit must be carried in the vehicle when the rack is mounted.
Do not travel with the bicycle rack empty. Store it in the boot of your vehicle. This prevents increased fuel consumption and
protects the rack.
The driver is always responsible for ensuring that the load and the load securing meet the regulations.

5. OPERATING INSTRUCTIONS

5.1 MOUNTING THE LABEL

Place the bicycle carrier on a stable surface. Open up the bicycle carrier.
Figure 3: Unfold the carrier
Bild 6: Insert the licence plate

5.2 MOUNTING THE FRAME HOLDER

Figure 9: Assembly of frame holder
Figure 4: Position the licence plate holder
Figure 7: Raise the upper frame section
Figure 5: Snap in the licence plate holder
Figure 8: Press in the licence plate and the upper
frame section
15