Table of Contents
Advertisement
About the ConnectCore 8X SBC Pro
Overview
The ConnectCore 8X SBC Pro is an ultra compact Pico-ITX board featuring the Digi ConnectCore 8X
system-on-module that integrates an NXP i.MX 8X application processor, LPDDR4 memory, eMMC
flash memory, WLAN/Bluetooth, power management IC for optimized power consumption applications
and a microcontroller assistant (MCA) for supporting additional functionality. This standalone product
serves as the reference design for the ConnectCore 8X system-on-module and can also be used on its
own to accelerate time to market.
Features and functionality
ConnectCore 8X System-on-Module:
n
MX8X Dual/Quad ARM Cortex-A35 and single Cortex-M4F cores
l
2 GB, 32-bit LPDDR4-1200 memory
l
16 GB, 8-bit eMMC memory
l
IEEE802.11 a/b/g/n/ac and Bluetooth 5.0
l
Power:
n
Power jack and industrial dedicated 5V power connector
l
Coin-cell battery charger, supplying the on-module RTC
l
Power and reset buttons
l
Boot source configuration: internal eMMC, microSD, USB
n
Debug:
n
Standard IEEE 1149.1-2001 JTAG interface
l
Single Wired Debug (SWD) interface for the microcontroller assistant
l
TTL serial console
l
Communication:
n
Two 10/100/1000 Mbps Ethernet interfaces
l
Two USB Host 2.0 interfaces on stacked USB A-type connector
l
USB3.0 on USB C-type connector
l
USB 2.0 OTG on micro AB-type connector
l
PCI Express Mini Card slot supporting full-size cards and Micro-SIM connection
l
XBee socket
l
MIMO IEEE 802.11 a/b/g/n/ac + Bluetooth 5.0 dual mode
l
ConnectCore® 8X SBC Pro Hardware Reference Manual
6
Advertisement
Table of Contents
