Miele G 7966 Operating Instructions Manual page 75

Setting "EcoStart"
The EcoStart function enables you to
benefit from cheaper electricity rates at
night. Before you can use this option,
you need to set up to 3 electricity rate
time zones (see "EcoStart" under
"Settings").
Then set the time by which the selected
program has to be finished.
The dishwasher will then start
automatically in the most economical
rate zone within the time set.
 Set the hours with the  sensor
buttons.
 Touch the minute number block.
 Use the  sensor buttons to enter
the minutes and confirm your entry
with OK.
The estimated start time for the
selected program will appear in the
display for several minutes.
 Close the door.
Waiting for EcoStart
display.
The program will start automatically
when the estimated start time is
reached.
will appear in the
Setting "SmartStart"
The SmartStart function is used for
starting your dishwasher automatically
at a time when your energy costs are
most economical.
To use this function you may need
further technical accessories.
If you have activated the
function in the
Settings
Timer  menu will no longer show the
EcoStart function but will instead show
SmartStart (see "Miele@home" under
"Settings").
If your energy provider offers this
service, they will send a signal to your
dishwasher when energy costs are at
their most economical.
This signal will start the dishwasher.
You can set the time by which the
program selected has to be finished.
The dishwasher will then calculate the
latest possible start time for the
program selected and will wait until this
start time for the signal from the energy
provider.
Options
SmartStart
menu, the
75