Water Drainage - Miele G 7966 Operating Instructions Manual

Installation

Water drainage

The appliance drainage system has a
non-return valve, which prevents dirty
water from flowing back into the
dishwasher via the drain hose.
The dishwasher is supplied with approx.
5 ft (1.5 m) of flexible drain hose with an
internal diameter of 7/8 " (22 mm).
The hose can be extended using a
connection piece to attach a further
length of hose. The drainage length
must not be longer than 13 ft (4 m) and
the delivery head must not exceed 3 ft
(1 m).
If the hose is to be directly connected
to the drainage outlet on site, use the
supplied hose clip (see the installation
diagram).
The hose can be directed to the left or
the right of the appliance.
The on-site connector for the drain hose
can be used for various hose diameters.
If the connector extends too far into the
drain hose, it must be shortened.
Otherwise, the drain hose can become
clogged.
The drain hose must not be shortened.
116
Lay the drain hose so that it does not
kink and is not being subjected to
pressure or tugged.

Risk of damage from leaking
water.
Leaking water can cause damage.
After servicing the appliance, ensure
that the drain does not leak.