Activating Autodos - Miele G 7966 Operating Instructions Manual

Activating AutoDos

The display changes to the settings
screen for AutoDos (see "Automatic
dispensing / AutoDos" under
"Detergent").
Even if you do not wish to use
AutoDos, you must remove the
transport locking device from the
PowerDisk compartment before
running the first program (see
"Activating AutoDos" under
"Detergent").
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
"Manual detergent dispensing" under
"Detergent").
 Select the setting you want and
confirm with OK.
This setting applies to all programs and
you can change it in a program's Extra
options menu.
Initial commissioning
Finally, prompts will appear in the
display.
After confirming these prompts with
OK, the messages 
the "QuickIntenseWash" program with the
"Express" option without a load

may appear.
Refill rinse aid
 Add salt and rinse aid if necessary
(see "Reactivation salt" and "Rinse
aid" under "Initial commissioning").
 Select OK to confirm the messages.
The selected program will be shown
briefly in the display.
The display will then show the
estimated program cycle time for the
program selected.
Refill salt and start
and
27