Remote Control - Miele G 7966 Operating Instructions Manual

Reset network configuration?
This menu option only appears if you
have already connected your
dishwasher to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be
reset whenever a dishwasher is being
disposed of or sold, or if a used
dishwasher is being put into operation.
This is the only way to ensure that all
personal data has been removed and
the previous owner will no longer be
able to access the dishwasher.
 Select the
Reset network configuration?
menu option.
 Select the
Yes
with OK.
option and confirm

Remote control

This menu option will only be
displayed if you have connected your
dishwasher to your WiFi network (see
"Miele@home" under "Settings").
If you wish to permanently turn off the
Remote control option, you can do this
under this menu option. The  sensor
button will then no longer be available
to select until you change this setting
again.
Even if the Remote control
turned off, you can use Miele to call up
information about your appliance.
However, you cannot start any
programs or change any settings from
it.
Settings
option is
39