Breadman AUTOMATIC BREAD BAKER Instruction Manual page 12

STEP 9
When your bread is done, the
Breadman ® will beep. This indicates that
the Baking phase is completed. Press the
STOP Button, then put on your oven
mitts and remove the Bread Pan.
Remember that the Bread Pan and your
loaf are both very hot! Be careful not to
place either on a tablecloth, plastic
surface, or other surface that might
scorch or melt.
For all Cycles except Dough:
If the bread is not removed immediately
after baking and if the STOP Button is
not pressed, a controlled Keep Warm
Cycle will begin and the machine will
automatically shut off after 3 hours.
While this will help prevent the bread
from becoming soggy, for best results,
remove bread immediately after the
Baking Cycle is complete.
STEP 10
Remove the loaf from the Bread Pan.
Turn over the Bread Pan a few inches
from the countertop and gently shake out
the loaf. It's best to remove the loaf as
soon as the machine is done baking.
Place the loaf on a wire rack or other
ventilated cooling surface to cool. Bread
should be cooled slightly (30 minutes)
before it is sliced.
If necessary, remove the Kneading
Paddle from the loaf.
Sometimes the Kneading Paddle will stick
in a loaf of bread. If it does, use a non-
metal utensil to gently remove it, taking
care not to scratch the Kneading Paddle.
When you are done using the Breadman
be sure to unplug it.
10
, ®