C Resetting Password - Huawei SUN2000-3KTL-M1 User Manual

SUN2000-(3KTL-10KTL)-M1
User Manual
Step 1 Ensure that the SUN2000 connects to the AC and DC power supplies at the same
time. Indicators
3 minutes.
Step 2 Perform the following operations within 3 minutes:
1.
2.
3.
4.
Step 3 Reset the password within 10 minutes. (If no operation is performed within 10
minutes, all inverter parameters remain unchanged.)
1.
2.
3.
Issue 02 (2020-11-20)
and
Turn off the AC switch and set the DC switch at the bottom of the SUN2000
to OFF. If the SUN2000 connects to batteries, turn off the battery switch. Wait
until all the LED indicators on the SUN2000 panel turn off.
Turn on the AC switch and set the DC switch to ON. Ensure that the indicator
is blinking green at long intervals.
Turn off the AC switch and set the DC switch to OFF. Wait until all LED
indicators on the SUN2000 panel are off.
Turn on the AC switch and set the DC switch to ON. Wait until all indicators
on the solar inverter panel blink and turn off 30 seconds later.
Wait until the indicator
Obtain the initial WLAN hotspot name (SSID) and initial password (PSW)
from the label on the side of the SUN2000 and connect to the app.
On the login screen, set a new login password and log in to the app.
Copyright © Huawei Technologies Co., Ltd.
C
Resetting Password
are steady green or blink at long intervals for more than
blinks green at long intervals.

C Resetting Password

110