Page 1
Pickleball System, 3” Inground Model: PKLBIG Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE UBLICATION 931752144 03/19/2019...
Page 2
Please do not substitute for factory parts. Contact the Gared or PSS customer service department and allow them to determine if substitute parts are acceptable.
Page 4
PKLBIG Pickleball System, Inground INSTALLATION SLEEVE INSTALLATION 1. The post sleeves must be set in a concrete foundation. The size of the foundation may need to vary with local codes. 2. Post sleeves must be spaced 22’-3” from sleeve center to center. 3.
Page 6
PKLBIG Pickleball System, Inground OPERATION 1. Now that the sleeves and sleeve caps are install and the concrete has cured, the system can be setup for playing pickleball. a. Remove the sleeve caps and carefully place each post into the sleeves until they contact the ½” threaded rod in the sleeve.
Page 7
PKLBIG Pickleball System, Inground i. Install net lacing on each post, starting at the top of the net as shown. j. After adjusting net, crank can be removed to prevent tampering. 2. To take the system down; a. Untie the net lacing. b.
Page 8
Gared Holdings, LLC Performance Sports Systems Gared Sports 9200 E. 146 Street 9200 E. 146 Street Noblesville, IN 46060 Noblesville, IN 46060 800-848-8034 800-325-2682 www.perfsports.com www.garedsports.com...
Need help?
Do you have a question about the GARED PKLBIG and is the answer not in the manual?
Questions and answers