Clearing Work Area
IMPORTANT
•
DO NOT operate in a work area that has
not been cleared of foreign debris and
obstacles.
•
Rocks, metal, construction debris and
other objects can damage the blade
carrier and blades.
•
Clearly mark any objects that cannot be
removed.
DANGER
STAY BACK 200 FEET
Severe Duty Brush Cutter Operator's Manual
Initial Setup
Install the severe duty brush cutter onto the
machine.
Move to the operator's position, lower seat bar,
start the engine and release the parking brake.
Engage the machine's front auxiliary hydraulics.
Using the machine's auxiliary hydraulic controls,
start blade rotation.
IMPORTANT
To minimize larger cut material discharging
to the rear, always keep the machine
between material being cut (work area) and
buildings, occupied areas or roadways.
Operation
23