Blue Diamond SEVERE DUTY BRUSH CUTTER Operation And Maintenance Manual page 13

Importance of Safety Cont'd
Fire Prevention Safety
• Flammable debris (leaves, grass, etc.) must be
removed regularly. If flammable debris is
allowed to accumulate, it can cause a fire
hazard. Clean often to avoid this accumulation.
• The equipment's hydraulic motor compartment
must be inspected every day and cleaned if
necessary to prevent fire hazards and
overheating.
• All fuels, most lubricants and some coolant
mixtures are flammable. Flammable fluids that
are leaking or spilled onto hot surfaces or onto
electrical components can cause a fire.
Transporting Safety
• Comply with state and local laws governing
highway safety and movement of machinery
on public roads.
• Check local laws for all highway lighting and
marking requirements.
• Always yield to oncoming traffic and move to
the side of the road so any following traffic may
pass.
• Never allow riders on either machine or
equipment.
• If transporting the brush cutter on a truck or
trailer, make sure the brush cutter is properly
secured to the transport vehicle.
Hydraulic System
• Check hydraulic tubes, hoses and fittings for
damage and leakage. Never use open flame or
bare skin to check for leaks. Hydraulic tubes
and hoses must be properly routed and have
adequate support and secure clamps. Tighten
or replace any parts that show leakage.
• Always clean fluid spills. Do not use gasoline or
diesel fuel for cleaning parts. Use commercial
nonflammable solvents.
Severe Duty Brush Cutter Operator's Manual
Safety
13