Table of Contents
Advertisement
How to Set-Up the Wi-Fi Feature on Gen-Eye Prism 2.0 Camera Systems
1.
Make sure the Prism Command Module
is turned ON and you are next to the unit.
2.
On your cell phone, tablet, or other Wi-Fi
enabled device, go to the Play Store
(Android). NOTE: You must have a
Google account set up before proceed-
ing.
3.
Search for and download "G-Pipe Wifi
Viewer".
4.
On your device, open "Settings" and se-
lect "Wi-Fi".
5.
Select "WIFI_XX:XX:XX_" (the numbers/
letters appearing after "WIFI_" will vary
by unit), and connect. Password:
12345678
6.
Open the downloaded WIFI VIEWER app
on your device.
Android icon
7.
When the app opens, a chart will appear. Select "wifi_device".
8.
You should see the image transmitted by the camera on your
screen.
Gen-Eye Prism
On an Android device
9.
You are now ready to record video or take snap shots.
Icon Key:
Home—takes you back to the main screen (devices list)
Tools—opens the settings menu for video, camera and audio.
Camera—tap to take snap shots
Video Camera—tap to begin/end recording video
File Folder—video/photo gallery (snap shots and videos are
The number of photos and/or the length of video you can shoot
will depend on the amount of storage available on your device.
10. To take a snap shot, tap the camera icon.
11. To start recording video, tap the video camera icon.
(Tap again to end recording).
12. To adjust the brightness, contrast, etc., tap the tools
icon and select your desired settings.
13. To view your snap shots and recordings, tap the file
folder icon in the WiFi Viewer app and select either the
"Picture" or "Record" file, then tap the image/video file
you want to view. You can also view your photos/videos
in your device's gallery.
NOTE: Your Android device may not be equipped to recognize the file
type used for the video. IF THIS HAPPENS, go to the Play Store and
download "MX Player". This is a free app with ads—they offer an ad-
free version for a small fee.
Then, open the desired video from the
WiFi Viewer app, or from your device's
gallery. You will be asked what pro-
gram you want to use to play the video.
Select "MX Player".
9
®
2.0 Video Pipe Inspection/Location System
Adjust brightness, contrast, resolution, etc.
Advertisement
Table of Contents
