Table of Contents
Advertisement
®
Gen-Eye Prism
2.0 Video Pipe Inspection/Location System
How to Set-Up the Wi-Fi Feature for Gen-Eye Prism 2.0 Camera Systems
1.
Make sure the Prism Command Module is turned ON and you are
next to the unit.
2.
On your cell phone, tablet, or other Wi-Fi
enabled device, go to the App Store.
NOTE: You must have an Apple account
set up before proceeding.
3.
Search for and download "G-Pipe Wifi
Viewer".
4.
On your device, open "Settings" and
select "Wi-Fi". Make sure Wi-Fi is ON.
5.
Select "WIFI_XX:XX:XX_" (the numbers/
letters appearing after "WIFI_" will vary by
unit), and join. Password: 12345678
6.
Open the downloaded WIFI VIEWER app
on your device.
iOS icon
7.
When the app opens, a chart will appear. Select "wifi_device".
8.
You should see the image transmitted by the camera on your
screen.
9.
You are now ready to record video or take snap shots.
On an Apple device
Icon Key:
Home—takes you back to the main screen (devices list)
Tools—opens the settings menu for video, camera and audio.
Camera—tap to take snap shots
Video Camera—tap to begin/end recording video
File Folder—video/photo gallery (snap shots and videos are
The number of photos and/or the length of video you can shoot
will depend on the amount of storage available on your device.
10. To take a snap shot, tap the camera icon.
11. To start recording video, tap the video camera icon.
(Tap it again to end recording).
12. To adjust the brightness, contrast, etc., tap the tools icon
and select your desired settings.
13. To view your snap shots and recordings, tap the file folder
icon in the WiFi Viewer app and select either the "Picture"
or "Record" file, then tap the image/video file you want to
view. You can also view your photos/videos in your de-
vice's gallery.
8
Adjust brightness, contrast, resolution, etc.
Advertisement
Table of Contents
