Table of Contents
Advertisement
Quick Links
Video Pipe Inspection/Location Systems
Your Gen-Eye Prism 2.0 Video Pipe In-
spection/Location System is designed to
give you years of trouble-free, profitable
service. However, no machine is better
than its operator.
Read, understand and follow all safety
warnings and instructions provided with
the product. Failure to follow the warnings
and instructions may result in electric
shock and/or serious injury. Save all warn-
ings and instructions for future reference.
SAVE THESE INSTRUCTIONS!
Gen-Eye Prism
Operating Instructions
2.0
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for General Pipe Cleaners Gen-Eye Prism 2.0
Summary of Contents for General Pipe Cleaners Gen-Eye Prism 2.0
- Page 1 Gen-Eye Prism ® Video Pipe Inspection/Location Systems Operating Instructions Your Gen-Eye Prism 2.0 Video Pipe In- spection/Location System is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator. Read, understand and follow all safety warnings and instructions provided with the product.
-
Page 2: Safety Symbols
Power tools create sparks which may ignite the dust or fumes. These instructions are intended to familiarize all personnel with the safe operation and maintenance Always wear safety glasses procedures for the Gen-Eye Prism 2.0 rubber soled, non-slip Video Pipe Inspection/Location Systems. shoes. -
Page 3: General Safety Rules
® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System GENERAL SAFETY RULES Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. WARNING Always wear safety glasses and rubber soled, non-slip Read and understand all instructions. -
Page 4: Front View
® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System Be sure that the unit is plugged into a properly grounded The stainless steel camera housing is made to protect the camera receptacle. If in doubt, check receptacle before plugging in and internal electronics. However, it can be damaged by severe im- machine. - Page 5 ® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System POWER SWITCH RIGHT SIDE VIEW Mounting Ball The Power Switch is located on the front of the Command Module with an indicator light next to it. Be sure the unit is plugged into a properly grounded outlet before turning it on.
- Page 6 ® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System TITLER WITH FULL KEYBOARD SETTING TIME/DATE The Gen-Eye Prism has an external full keyboard titler. It gives you Hold [CTRL] and press D. “YYMMDDHHMMSSam” appears nine pages of text to easily add your company name and job loca- on the screen.
-
Page 7: Operation
® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System SKIDS SET UP It is highly recommended that you use a skid at all times Pre-Inspection Procedure to protect the camera head from abrasion in the pipe. Upon arrival to the job site, set up the Gen-Eye Prism in an Skids lift the camera off the bottom of the pipe and center easily viewable position where it will not interfere with the in- it in the line for a better view and to allow the camera to... - Page 8 ® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System How to Set-Up the Wi-Fi Feature for Gen-Eye Prism 2.0 Camera Systems On an Apple device Make sure the Prism Command Module is turned ON and you are Icon Key: next to the unit.
- Page 9 ® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System How to Set-Up the Wi-Fi Feature on Gen-Eye Prism 2.0 Camera Systems On an Android device Make sure the Prism Command Module You are now ready to record video or take snap shots.
- Page 10 ® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System CAMERA LOCATION Watch the Gen-Eye Hot Spot monitor display as you approach the transmitter’s location. Turn on Gen-Eye Prism Camera system. When you reach the vicinity of a NULL point the screen will Press and hold the Hot Spot Locator produce this display: On/Off button.
-
Page 11: Camera Maintenance
® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System MAINTENANCE After disconnecting the camera assembly, inspect the O-ring for any damage, and if worn, replace it with a new one. Also, when replacing any O-rings, make sure there is no dirt or grit on it, as it DISCONNECT MACHINE FROM POWER SOURCE BE- may not seal properly. -
Page 12: Additional Maintenance Tips
® Gen-Eye Prism 2.0 Video Pipe Inspection/Location System ADDITIONAL MAINTENANCE TIPS No Picture, Lights OK The camera should always be cleaned and inspected after every Check Monitor power switch is ON. Check to make sure the use as dirt, grime and grease can cause unnecessary problems power source is “live”...
Need help?
Do you have a question about the Gen-Eye Prism 2.0 and is the answer not in the manual?
Questions and answers