General Pipe Cleaners Gen-Eye POD Operating Instructions Manual

General Pipe Cleaners Gen-Eye POD Operating Instructions Manual

Video pipe inspection/location system

Advertisement

Gen-Eye POD
Video Pipe Inspection/Location System
Your Gen-Eye POD/MINI-POD/X-POD
is designed to give you years of trouble-
free, profitable service. However, no ma-
chine is better than its operator.
Read, understand and follow all safety
warnings and instructions provided with
the product. Failure to follow the warnings
and instructions may result in electric
shock and/or serious injury. Save all warn-
ings and instructions for future reference.
SAVE THESE INSTRUCTIONS!
, MINI-POD
Operating Instructions
800-610-4101 • ActionRental.com
& X-POD

Advertisement

Table of Contents
loading

Summary of Contents for General Pipe Cleaners Gen-Eye POD

  • Page 1 Gen-Eye POD , MINI-POD & X-POD Video Pipe Inspection/Location System Operating Instructions Your Gen-Eye POD/MINI-POD/X-POD is designed to give you years of trouble- free, profitable service. However, no ma- chine is better than its operator. Read, understand and follow all safety warnings and instructions provided with the product.
  • Page 2: Safety Symbols

    Gen-Eye POD™ & Gen-Eye MINI-POD™ Electric shock resulting death can occur if you plug this machine into an improp- erly wired outlet. If the ground wire is electrified, you can be WARNING! Read and understand all electrocuted by just touching the machine, even when the instructions.
  • Page 3 Gen-Eye POD™ & Gen-Eye MINI-POD Personal Safety GENERAL SAFETY RULES Stay alert, watch what you are doing and use common sense WARNING when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A mo- Read and understand all instructions.
  • Page 4 Color Camera & 3” Skid The Gen-Eye POD should not be used in wet locations or in the rain. Moisture may cause damage to the unit. The POD will operate on 120vAC and 12vDC Line Voltage.
  • Page 5 Gen-Eye POD™ & Gen-Eye MINI-POD™ SET UP CAMERA TRANSMITTER (512 HZ) Your system may include a 512Hz transmitter, which is located safely On arrival to the job site and after check- in the spring behind the camera. (The transmitter is standard on the ing for a properly grounded receptacle, set full-size POD and X-POD, and optional on the MINI-POD.) When the...
  • Page 6 Repeat step 7 and 8 as you narrow your search area. When storing the Gen-Eye POD between uses, the gooseneck/ 10. A small ghost signal may appear in front and behind the peak monitor assembly can be folded down for more compact storage.
  • Page 7: Troubleshooting

    LIGHT HEAD REPLACEMENT Picture, BUT No Lights: The light heads for the Gen-Eye POD cameras use LED lighting and Check to see if light intensity control is turned up. cannot be replaced by the operator. These lights use very little power.
  • Page 8 GENERAL'S LIMITED WARRANTY General’s Gen-Eye POD, Mini-POD, & X-POD video pipe inspection/location system carries a two-year warranty against defect in materials except as noted below. Should any part break or fail to work properly in the two years following purchase, it will be repaired or replaced at our discretion at no charge.

This manual is also suitable for:

Gen-eye mini podGen-eye x-pod

Table of Contents