Alesis ProLinear DSP Reference Manual page 35

3
Using the Software
Changing the COM Port Number
We've provided a shortcut that allows you o change the
t
communication port number for your ProLinear DSP
speakers without having to access the Device Manager inside
the Windows Control Panel.
To do this, click on the Ports tab. You will see a screen that
looks like this:
Use the drop-down menu to select the serial port through
which your ProLinear DSP speakers will communicate with
the PC. For more information about configuring serial com
ports on your PC, see your operating system or hardware
documentation.
IMPORTANT: If the com port that you configured in the
Windows Control Panel is not listed here, then it is not
available to the ProLinear DSP application. Choose the port
you wish to use and exit the application without saving the
configuration. Next, set up the appropriate port through the
Windows Control Panel according to the appropriate
procedure for your PC's operating system.
33