Save Mode - Alesis ProLinear DSP Reference Manual

2
Operations

Save Mode

Save mode allows you to preserve the changes you have made
to the EQ curve by saving it to one of the eight User Program
locations.
To enter Save mode, press the Save button. The Program
number will begin to flash. From this point:
•
The Value Up/Down buttons select the User
Program location into which the edited Program
will be saved.
•
Pressing the Page button will exit Save mode
without saving the Program and take the
speaker to Program mode.
•
Pressing the Save button again will save the
edited Program to the selected User program
location, and then returns the speaker to
Program mode. Any speaker on the same
Channel will also save the edited Program to its
User bank. As the Program is being saved, the
SAVED icon on the display will illuminate for
about two seconds.
20
Program Up
Exit Save Mode
Program Down
Save Settings
If you attempt to store a
Program to a Preset
Program location, the
ProLinear DSP will
automatically store the
Program to the same
number location in the User
bank.