Table of Contents
Advertisement
Using the Software
3
The ProLinear DSP Windows application lets you easily
control and configure your ProLinear DSP speakers through a
standard 9-pin RS-232 serial connection. You can then apply
these settings to one of eight available user-defined programs.
Overview
There are two main levels of control in the PC software: the
Channel level and the Program level. At the Channel level
you may select which Channel the software is displaying,
what Program is on each Channel, and what the Gain Trim
setting is for each Channel. Once you have a configuration
of EQ curves and Channels you would like to keep, you may
save them as a "Workspace" for later recall.
At the Program level, you may adjust the equalizer
parameters (Frequency, Q, and Gain) and then save the
curve to one of the eight User Program locations within the
speaker and within the Workspace at the same time. You can
also store a name with each EQ curve as well as a set of
notes with the User bank you have assembled.
Here is an example of the main software screen:
Remember, a Channel may
consist of one speaker or a
group of speakers with the
same Channel setting.
The Curve Name is only
viewable in the PC software.
23
Hide quick links:
Advertisement
Table of Contents
