Table of Contents
Advertisement
7
Section 7 - Troubleshooting Guide
Problem
1. Unit will not turn on.
2. Unit turns on but the target
plate will not get hot.
3. Target plate temperature will
not stabilize at the setpoint
7-1
Troubleshooting Guide
Solution
a. Check all electrical connections.
b. Check top panel fuse.
c. Unit requires service, contact our
customer service department.
a. Check that you have
set a setpoint above the ambient
temperature.
b. Burned out heating element.
Unit requires service, contact our
customer service department.
a. Unit may be out of calibration
and requires service, contact our
customer service department.
Advertisement
Table of Contents
