Power Connection - Omega BB-2A User Manual

Blackbody calibration source
Table of Contents

Advertisement

2
Installation
2.3

Power Connection

Standard (120 VAC~, 50/60 Hz models)
The BB-2A comes with a standard North American 3-prong AC power
cord. Do not use any other power cord other than the one provided.
This cord provides the proper grounding and has been safety tested by
the proper safety agencies.
International (240 VAC~, 50/60 Hz models)
On 240 VAC~, 50/60 Hz models a European style power cord with the
proper color code and approvals is provided with 3-prong connector.
2-2
• Line voltage variations are not to exceed ±10% of
the rated input voltage.
• Electrical connections and wiring should be performed
only by suitably trained personnel.
• To shut down the unit in an emergency, the power
cord can be disconnected from the AC outlet.
CAUTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bb-2a-230

Table of Contents