Table of Contents
Advertisement
Modbus Server – FUJITSU VRF
TM
Intesis
1. Description
Introduction
1.1.
This document describes the integration of Fujitsu VRF air conditioning systems into Modbus compatible devices
and systems using gateway the Intesis Modbus Server to Fujitsu VRF communication gateway.
The aim of this integration is to monitor and control Fujitsu air conditioning systems, remotely, from a Control Center
using any commercial SCADA or monitoring software that includes a Modbus Master driver (RTU and/or TCP). To
do it so, Intesis performs as a Modbus Server, allowing poll and write requests from any Modbus master device.
Intesis makes available the Fujitsu air conditioning system indoor units' datapoints through independent Modbus
registers.
Up to 16 indoor units supported, depending on product version.
This document assumes that the user is familiar with Modbus and Fujitsu technologies and their technical terms.
Integration of Fujitsu's compatible systems into Modbus systems
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
User Manual r1.0 EN
URL
https://www.intesis.com
5 / 25
Advertisement
Table of Contents
Need help?
Do you have a question about the Intesis INMBSFGL016O000 and is the answer not in the manual?